Tolls and Touch n Go for rental cars in Malaysia
최종 업데이트 2026년 9월 16일
Yes, rental cars in Malaysia pay tolls on toll highways. The important thing to know is that Agtran does not provide a Touch n Go card or RFID with the rental, so you need to prepare your own toll payment method before you travel. Most drivers use a Touch n Go card, which works across Malaysia's toll highways.
Do Rental Cars in Malaysia Pay Tolls?
Yes. If you drive a rental car on a Malaysian highway that charges a toll, you pay the applicable toll fee. Malaysia has many toll highways connecting the major cities and destinations, so tourists renting a car will often meet tolls when travelling between cities, using the expressways, or driving to and from the airports. Understanding how toll payment works before you set off helps you avoid problems at the toll plazas.
Does Agtran Provide a Touch n Go Card or RFID?
No. Agtran does not provide a Touch n Go card or an RFID tag to rental customers. You should prepare your own toll payment method before or during your rental period. This is an important point to plan for: do not assume a card will be waiting in the car. Before you travel, make sure you have a suitable way to pay tolls so you are not caught out at a toll plaza.
How Tolls Are Paid in Malaysia
One of the most common ways to pay tolls in Malaysia is with Touch n Go. There are two forms drivers may come across:
- Touch n Go card, a physical stored-value card
- Touch n Go RFID, an electronic tag attached to a vehicle
The method you can use depends on the toll lane. For a tourist in a rental car, the Touch n Go card is usually the simpler choice, because it does not require attaching anything to the vehicle.
Using a Touch n Go Card
A Touch n Go card is a stored-value card accepted at participating toll highways across Malaysia. Before entering a toll road, make sure the card has enough balance. For a tourist using a rental car, the steps are simple:
- Get a Touch n Go card (available at many convenience stores and airports)
- Make sure the card has sufficient balance
- Use the card at the appropriate toll lane
- Follow the toll lane signs
- Keep the card safe during your rental period
- Check the remaining balance regularly
The card is convenient for tourists because it works even if you use different vehicles during your trip, and it does not require an RFID tag on the rental car.
What Is Touch n Go RFID?
Touch n Go RFID is an electronic toll payment system that uses an RFID tag attached to a vehicle. When the vehicle passes through an RFID-enabled lane, the system reads the tag and deducts the toll from the linked account. The key point for rental customers: an RFID tag is registered to a specific vehicle, so do not assume your personal RFID tag can be transferred to a rental car. Check the requirements first. For an Agtran rental, it is simplest to arrange your own toll payment method, such as a Touch n Go card, rather than relying on RFID.
Touch n Go Card vs RFID
A quick comparison to help you choose:
- Card: a physical card you top up and tap at the lane. No tag needed on the vehicle. Works well for tourists moving between vehicles.
- RFID: a tag fixed to a registered vehicle, linked to a payment account, deducted automatically. Tied to one vehicle, so check compatibility before using with a rental.
How Much Balance Should You Have?
Make sure your Touch n Go payment method has enough balance before using a toll road. It is worth checking your balance before a long journey, especially when travelling between cities. For example, if you rent a car in Kuala Lumpur and drive to another state, you may pass through several toll roads along the way. Keeping enough balance prevents hold-ups at the toll plazas.
Tips for Tourists Using a Rental Car
- Prepare your toll payment before driving. Do not wait until you reach a toll plaza to work out how to pay.
- Check your balance. Make sure your card or linked account has enough for the journey.
- Follow the lane signs. Different lanes support different payment methods, so choose the correct one.
- Do not transfer an RFID tag without checking. Tags are tied to a registered vehicle, so confirm the requirements first.
- Keep your card safe. If you use a physical card during the rental, keep it with you and avoid losing it.
Do Tourists Need Touch n Go to Drive in Malaysia?
If you rent a car and use Malaysian toll roads, you need a suitable way to pay the toll, and Touch n Go is the most commonly used method. The important point is to prepare your own payment method before travelling, because Agtran does not provide a Touch n Go card or RFID to rental customers. With a card ready and topped up, paying tolls is quick and simple.
Toll and Touch n Go checklist
- Get your own Touch n Go card if you plan to use one
- Make sure it has sufficient balance
- Check which lanes support your payment method
- Do not assume Agtran provides a card or RFID
- Do not transfer an RFID tag to a rental car without checking
- Keep your card safe during the rental
- Plan your route if travelling between cities
Planning a road trip? It helps to prepare your route and your toll payment before collecting the car. You can explore our rental locations, including Kuala Lumpur, Ipoh, Penang, and Melaka, and read our guide on the documents you need to rent a car. When you are ready, book your car online.
This article answers common questions about tolls, including:
- Do rental cars in Malaysia pay tolls
- Does Agtran provide a Touch n Go card or RFID
- How do I pay tolls as a tourist in a rental car
- What is the difference between a Touch n Go card and RFID
- How much balance should I keep on my card
출발할 준비가 되셨나요?
날짜를 선택하시면 인수 장소에 차량을 준비해 두겠습니다.
지금 예약하기